The Alpha Geek – Geeking Out

SparkFun – USB LiPoly Charger – Single Cell

SparkFun PRT-10161 Mk01

SparkFun PRT-10161 Mk02

SparkFun PRT-10161 Mk03

SparkFun: PRT-10161

Description: If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The USB LiPo Charger is a basic charging circuit that allows you to charge 3.7V LiPo cells at a rate of 500mA or 100mA. It is designed to charge single-cell Li-Ion or Li-Polymer batteries. Check the datasheet below to see if it will work with your battery.

The board incorporates a charging circuit, status LED, selectable solder jumper for 500mA or 100mA charging current, external LED footprint, USB input, mounting holes, and various holes for your own connectors. We include a single JST-tpye connector which connects directly to our LiPo batteries. The connector comes unsoldered, so you can use it or not.

There is also a ‘SYS OUT’ which allows you to connect the charging circuit directly to your project so you don’t need to disconnect the charger each time you want to use it.

Don Luc

Leave a Reply

Your email address will not be published. Required fields are marked *

Categories
Archives