{"id":462,"date":"2015-06-24T15:00:52","date_gmt":"2015-06-24T15:00:52","guid":{"rendered":"http:\/\/www.donluc.com\/?p=462"},"modified":"2015-06-24T15:00:52","modified_gmt":"2015-06-24T15:00:52","slug":"sparkfun-protoshield-kit","status":"publish","type":"post","link":"https:\/\/www.donluc.com\/?p=462","title":{"rendered":"SparkFun – ProtoShield Kit"},"content":{"rendered":"

\"SparkFun<\/a><\/p>\n

\"SparkFun<\/a><\/p>\n

\"SparkFun<\/a><\/p>\n

SparkFun:<\/strong> DEV-07914<\/p>\n

Description:<\/strong> Riding on the waves of the very popular Arduino USB board is this small prototyping shield. Originally spawned with collaboration between the folks at SFE and ITP @ NYU, the ProtoShield mates with the Arduino USB board and gives the user a small soldering area, two general LEDs, access to a BlueSMiRF socket, a general pushbutton switch, and most important of all – the Arduino reset switch is brought to the top level. A ProtoShield quickstart guide is available!<\/p>\n

This comes in kit form and must be soldered together by the end user. Please note – we do not ship assembly instructions, but you can find a big, clean photographed assembly guide here! There are a few tutorials on assembly listed below. All soldering is through-hole (relatively easy) but always check your component orientation before soldering!<\/p>\n

The kit is pictured with the bread-board option. We highly recommend this breadboard! See the related items below for all the colorful options of breadboards you have.<\/p>\n

Note:<\/strong> The SparkFun ProtoShield Kit does not include the holes for the Uno R3 SDA and SCL.<\/p>\n

Kit Includes:<\/strong><\/p>\n