{"id":1514,"date":"2018-04-15T12:02:05","date_gmt":"2018-04-15T19:02:05","guid":{"rendered":"http:\/\/www.donluc.com\/?p=1514"},"modified":"2018-04-15T12:02:05","modified_gmt":"2018-04-15T19:02:05","slug":"project-6-microview-mk04","status":"publish","type":"post","link":"https:\/\/www.donluc.com\/?p=1514","title":{"rendered":"Project #6: MicroView – Mk04"},"content":{"rendered":"

\"\"<\/a><\/p>\n

https:\/\/www.donluc.com\/wp-content\/uploads\/2018\/04\/DonLuc1804Mk06.mp4<\/a><\/video><\/div>\n

MicroView<\/strong>
\nProject #6 \u2013 Mk04<\/strong><\/p>\n

Trimpot – LED<\/strong><\/p>\n

1 x MicroView
\n1 x MicroView – USB Programmer
\n1 X Trimpot 10K with Knob
\n1 X Resistor 2.55k Ohm
\n1 X 3MM Low Current Red LED
\n6 x Jumper Wires 3″ M\/M
\n1 x Half-Size Breadboard<\/p>\n

05 pin – A2
\n08 pin – GND
\n11 pin – 2
\n15 pin – +5V<\/p>\n

DonLuc1804Mk06d.ino<\/strong><\/p>\n

\r\n\/\/ ***** Don Luc *****\r\n\/\/ Software Version Information\r\n\/\/ 3.01\r\n\/\/ DonLuc1804Mk06 4.04\r\n\/\/ MicroView\r\n\/\/ Trimpot - LED\r\n\r\n\/\/ include the library code:\r\n#include <MicroView.h>\r\n\r\n\/\/ Potentiometer\r\nint potPin = A2;    \/\/ select the input pin for the potentiometer\r\nint ledPin = 2;   \/\/ select the pin for the LED\r\nint potPot = 0;\r\nString cap = "";\r\n\r\nvoid loop() {\r\n\r\n  \/\/ Potentiometer\r\n  isCap();\r\n\r\n  delay(500);\r\n  uView.clear(PAGE);\r\n  \r\n}\r\n<\/pre>\n
getPot.ino<\/strong><\/p>\n
\r\nvoid isCap(){\r\n\r\n    potPot = analogRead(potPin);    \/\/ read the value from the sensor\r\n    cap = "Pot: ";\r\n    cap.concat(potPot);\r\n    \r\n    uView.setFontType(0);\r\n    uView.setCursor(0,20);\r\n    uView.print( cap );\r\n    uView.display();\r\n    \r\n}\r\n<\/pre>\n
setup.ino<\/strong><\/p>\n
\r\nvoid setup() {\r\n\r\n  uView.begin();       \/\/ begin of MicroView\r\n  uView.clear(ALL);    \/\/ erase hardware memory inside the OLED controller\r\n  uView.display();     \/\/ display the content in the buffer memory, by default it is the MicroView logo\r\n  delay(1000);\r\n  uView.clear(PAGE);   \/\/ erase the memory buffer, when next uView.display() is called, the OLED will be cleared.\r\n\r\n  uView.setFontType(1);\r\n  uView.setCursor(0,20);\r\n  uView.print("Don Luc");\r\n  uView.display();\r\n  delay(5000);\r\n\r\n  uView.clear(PAGE);   \/\/ erase the memory buffer, when next uView.display() is called, the OLED will be cleared.\r\n\r\n  uView.setFontType(0);\r\n  uView.setCursor(0,20);\r\n  uView.print("TrimpotLED");\r\n  uView.display();\r\n  delay(5000);\r\n  \r\n  uView.clear(PAGE);\r\n\r\n  \/\/ ledPin\r\n  pinMode(ledPin, OUTPUT);\r\n  digitalWrite(ledPin, HIGH);  \/\/ turn the ledPin on\r\n\r\n}\r\n<\/pre>\n
Don Luc<\/strong><\/p>\n","protected":false},"excerpt":{"rendered":"
MicroView Project #6 \u2013 Mk04 Trimpot – LED 1 x MicroView 1 x MicroView – USB Programmer 1 X Trimpot 10K with Knob 1 X Resistor 2.55k Ohm 1 X 3MM Low Current Red LED 6 x Jumper Wires 3″ M\/M 1 x Half-Size Breadboard 05 pin – A2 08 pin – GND 11 pin … Read more<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[70,47,50,38,5,58,10,43],"tags":[],"class_list":["post-1514","post","type-post","status-publish","format-standard","hentry","category-microview","category-adafruit","category-arduino","category-digitalelectronics","category-microcontrollers","category-arduino-programming","category-projects","category-sparkfun"],"_links":{"self":[{"href":"https:\/\/www.donluc.com\/index.php?rest_route=\/wp\/v2\/posts\/1514","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.donluc.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.donluc.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.donluc.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.donluc.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=1514"}],"version-history":[{"count":2,"href":"https:\/\/www.donluc.com\/index.php?rest_route=\/wp\/v2\/posts\/1514\/revisions"}],"predecessor-version":[{"id":1518,"href":"https:\/\/www.donluc.com\/index.php?rest_route=\/wp\/v2\/posts\/1514\/revisions\/1518"}],"wp:attachment":[{"href":"https:\/\/www.donluc.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=1514"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.donluc.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=1514"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.donluc.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=1514"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}